Dead outlets, tripping breakers, a panel that has run out of room, a house that needs its wiring brought up to code before a sale closes. These are the calls we handle in Alexandria, and the range runs from a single receptacle replacement to a full service upgrade. We handle the electrical work for homeowners, property managers, and businesses throughout the city, and the scope of what we do is the same regardless of whether the job takes an hour or a full day. Working here means getting the diagnosis right before the work starts.
Reach out and we'll start at the panel.
Seeing flickering lights or a warm outlet? Both are worth a call before they turn into something more serious. We trace faults back to the source, whether that is a loose connection at the device, a failing breaker, or a wiring issue further up the circuit. GFCI and AFCI protection gets tested wherever it is part of the circuit, because a nuisance trip and a genuine arc fault can look similar until you run the right test.
Burning smells near a switch, sparking at an outlet, or a room that has lost power while the rest of the house is fine are not problems to watch and wait on. We check the circuit, check the panel, and give you a plain answer on what the fix involves before any work begins.
Recessed lighting, LED retrofits, under-cabinet fixtures, and ceiling fan installation are all jobs we take on as standalone calls. An outlet that stopped working, a dimmer that buzzes, or a three-way switch that has never been wired correctly are all straightforward once the circuit is in front of us. Exterior lighting runs, including security lights and motion sensor fixtures, require weatherproof wiring and proper circuit placement, and we handle both the fixture and the run.
A dryer, a range, a refrigerator, or a chest freezer each needs its own dedicated circuit sized for the load. That is a code requirement, not a preference. We pull the circuit, install the correct outlet, and confirm the breaker is sized for the appliance before the job is done. Kitchen remodels and finished basements in Alexandria regularly require new dedicated runs, and we scope those jobs against the panel's available capacity before anything is scheduled.
A backup generator is only as useful as the transfer switch that connects it safely to the panel. We handle the electrical side: the transfer switch installation, the dedicated circuit that feeds the generator connection, and the standby wiring that ties it into the home's breaker panel. A transfer switch keeps the generator from back-feeding the utility line, which matters for safety and for code compliance. The generator unit itself is outside our scope, but the wiring and the transfer switch are the work we do.
A panel that runs hot, a breaker that trips repeatedly and will not hold, or a box that has run out of space for new circuits are all signs the panel needs attention. We handle breaker replacement, full panel replacements, and subpanel installation where a detached structure or a large addition needs its own distribution point. A load calculation tells us what the new panel needs to carry before we spec the work.
A 100-amp service that was adequate when the house was built may not be adequate now. An EV charger, a home office with multiple dedicated circuits, and an updated kitchen can push an older service past its practical limit. A service upgrade involves replacing the main panel, updating the service entrance, and configuring the breakers for the actual load the house carries. We run the load calculation first so the new service is sized for what the home needs, not just what it had before.
Properties with well pumps or irrigation systems need dedicated circuits sized for the motor load those systems draw. A well pump that trips its breaker repeatedly, or an irrigation controller that shares a circuit it should not, points to a wiring or capacity issue we can address directly. We run the circuit, size the breaker, and confirm the panel can support the load before the work is scheduled.
Alexandria's housing stock covers a wide range of construction eras, and the wiring that turns up in an older property depends entirely on when it was built and whether anyone has touched it since. Knob-and-tube wiring, where it still exists, runs without a ground conductor and was never designed for the loads a modern household places on it. It is not automatically a fire hazard in every installation, but it cannot be extended, it cannot support GFCI protection the way current code requires, and it complicates any renovation that opens a wall.
Aluminum branch-circuit wiring is a different situation. It was used widely during a period when copper prices made it an attractive alternative, and it is still present in a significant number of homes across Northern Virginia. Aluminum wiring is not inherently dangerous, but it requires aluminum-rated devices and proper connections at every termination point. Where those connections have loosened or corroded over time, the risk of arcing increases. Aluminum wiring remediation involves checking and correcting every connection point, not just the ones that are visibly damaged.
Whole-home rewiring is available for properties where the existing wiring is too far gone to patch. We explain what we find and give you a plain answer on whether a targeted repair addresses the root cause or whether a more complete approach makes more sense. Code-compliant wiring on every job means the work holds up when the inspector arrives.
For most wiring, outlet, switch, and panel work, the circuit being worked on needs to be de-energized. That does not always mean the whole house goes dark. A single circuit can often be isolated while the rest of the home stays live, which matters a great deal for a household where someone is working from home or a business that has to stay open through the repair.
Panel work is the exception. Replacing a main breaker panel or upgrading the service entrance requires the main service to be shut down, and that takes the whole building with it. We plan that window carefully, confirm what will be without power and for how long before we start, and work to keep the outage as short as the job allows. For commercial spaces or rental properties with tenants, we talk through the timing on the call so the shutdown happens at the least disruptive point in the day.
Electrical safety inspections and troubleshooting steps sometimes require the circuit to stay live so we can test under load. Hands-on repair work always requires the power off. We explain which applies before we begin.
The price for electrical work reflects what the job actually involves, and that depends on three things: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change without an upgrade.
A breaker replacement and a full panel upgrade are not the same job, and the price reflects that difference. A single outlet installation in a finished room where the wiring is already in place is a different scope from running a new dedicated circuit through a finished wall from the panel. We cover all of that on the call, so the price is confirmed before anything is scheduled and the scope reflects what is actually there.
When you call, you get a straight answer on what the work involves and what it covers. Ask what it covers and you get a straight answer. We do not schedule anything until the scope and the price are clear. Leave the breakers to us. For what the job actually entails, our list of electrical services lays it out.
Scheduling electrical work in Alexandria is straightforward. We are available every day from 6:30 AM to 9:30 PM, including evenings and weekends, which means after-hours appointments are part of how we operate rather than an exception. When you call, we confirm what the schedule allows and match the appointment to a window that works for the property.
For rental properties, we work around tenant access and coordinate the timing so the shutdown, if there is one, does not land at the worst possible moment. For businesses, we discuss what the trading day looks like and plan the work accordingly. A property that has to stay open through a repair gets a different approach than an empty house, and we plan for that on the call rather than figuring it out at the door.
For problems that will not keep, we take short-notice calls and work to fit urgent jobs in as quickly as the schedule allows. Ask what the current schedule allows and we will tell you what is open.
We cover Alexandria as the primary service area for this part of Northern Virginia, and the surrounding communities are covered as well. Huntington, Rose Hill, Belle Haven, Bailey's Crossroads, and Lincolnia are all part of the area we serve regularly. Whether the property is a single-family home, a multi-unit building, a commercial suite, or a rental, the same scope of work applies across the region.
If you are unsure whether your address falls within our service area, call and we will confirm it on the spot.
We handle the coordination with the utility for jobs that require a service entrance change or a meter base replacement. That includes the utility's disconnect and reconnect scheduling. We explain the coordination process and how it affects the timeline when we scope the work.
If we find something during the visit that was not part of the original scope, we stop and explain what we found before proceeding. We give you a plain answer on what the issue is, what it would take to correct it, and whether it needs to be addressed urgently or can be scheduled separately. No additional work is done without your agreement.
Burning smells near an outlet or panel, sparking when plugging something in, a breaker that trips and will not reset, or a cover plate that is warm to the touch are all signs that warrant a call now rather than a wait. We can help you assess the situation on the phone and confirm whether the problem needs to be seen right away or can be scheduled in the normal window.
We work on single-family homes, condominiums, multi-unit residential buildings, rental properties, and light commercial spaces throughout Alexandria. The scope of the work varies by property type, but the approach stays the same: we scope the job on the call, confirm the price, and explain what the visit covers before anything is scheduled.
We confirm access arrangements on the call. For a vacant property, that typically means a key, a lockbox code, or a property manager meeting the electrician at the property. We confirm who will provide access and how before we schedule the visit so the electrician is not waiting at the door with no way in.
Permit requirements for panel work and service upgrades in Alexandria depend on the scope of the job and the jurisdiction. We confirm what applies to your specific address before any work is scheduled, so nothing starts without the right sign-off in place. Wiring work is checked against code before sign-off, which matters when the job involves an inspection.
When the planned trench route is blocked by a driveway, a foundation, or another obstruction, we discuss the alternative routing on the call. Options depend on the layout of the property and what the obstruction is. In some cases, directional boring or a different routing path is the practical solution, and we explain what each option involves before the work is scoped.
We handle the permit coordination for jobs that require one. Permit requirements vary by jurisdiction and by the type of work being done, and we confirm whether a permit applies when we scope the job. The cost of the permit is discussed as part of the overall job price before anything is scheduled.
Repairs, panel upgrades, generator hookups, surge protection, dedicated circuits, rewiring, lighting, outlets, EV charger installation, electrical safety inspections: we handle the full scope of electrical work for homes and businesses in Alexandria.
Call (571) 592-9789 to get a quote. We are available every day from 6:30 AM to 9:30 PM.
When you call, you reach someone who knows the trade and can scope the job on the phone. There are no forms to fill out and no waiting for a callback.
Call (571) 592-9789 and get on the schedule with Woodbridge Electrical Company.
Everywhere else we go is in our list of local areas. Electrical work also reaches these towns: Rose Hill, Kingstowne, Franconia, Woodlawn, Fort Washington.
We handle the full range of electrical work for homes, rental properties, and businesses in Alexandria and across the surrounding area. The table below breaks down each service by what it covers, who it fits best, and one practical thing worth knowing before you call. Scope and pricing are confirmed on the call before anything is scheduled, so you know exactly what the work involves going in.
| Type of Work | What the Job Involves | When You Need It | Good to Know |
|---|---|---|---|
| Ceiling Fan Installation | Junction box rating checkNew wiring runs where neededFan and switch installationDimmer and remote-compatible wiring | Bedrooms and living areas where no ceiling box exists or the existing box is not fan-rated | A standard light fixture box is not always rated to hold a fan. We check and replace it if needed before the fan goes up. |
| Dedicated Appliance Circuits | 240-volt outlet installationDryer and range circuitsRefrigerator and microwave circuitsPanel capacity check | Any major appliance installation or kitchen and laundry remodel | Current code requires a dedicated circuit for most large appliances. We confirm panel capacity before pulling the new run. |
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgradeLoad calculationSubpanel installationService entrance and meter work | Homes adding an EV charger, remodeling a kitchen, or running on an undersized older panel | A load calculation before the upgrade confirms the right panel size for what the home actually needs to carry. |
Call (571) 592-9789 and we will scope the job, confirm the price, and get it on the schedule.
(571) 592-9789